小網管筆記

1.利用encapsulation hdle命令為每片序列介面設定封裝

RouterA(config)#int s0

RouterA(config)#encapsulation hdls

RouterB(config)#int s0

RouterB(config)#encapsulation hdls

2.確認HDLC封裝

Router#sh int s0

Serial0 is up, line protocol is up
  Hardware is M4T
  Description: Router
  Internet address is 192.168.141.97/30
  MTU 1500 bytes, BW 2048 Kbit/sec, DLY 20000 usec,
     reliability 255/255, txload 4/255, rxload 1/255
  Encapsulation HDLC, LCP Open
  Open: IPCP, crc 16, loopback not set